8 Directional Vertical Milling Manufacturer,Supplier and Exporter in India
Product Code : EL-CTM-11750
Quick Answer: The 8 Directional Vertical Milling machine has a 70 x 330 mm table with 2 T-slots, travels of 229 x 178 x 137 mm and a 90 V DC motor giving 70–2800 rpm, continuously variable by electronic speed control.
Last updated: October 2026
Key Features
Table 70 x 330 mm with two T-slots for hold-down.
Travel X 229 mm, Y 178 mm, Z 137 mm; maximum table to spindle clearance 229 mm.
Adjustable throat.
Spindle with 10 mm through hole and 3/4-16 TPI nose thread.
90 V DC motor with electronic speed control accepting 100–240 V AC, 50 or 60 Hz.
Spindle speed 70–2800 rpm, continuously variable.
Technical Specifications
Specification
Value
Table size
70 x 330 mm
Hold down
2 T-slots
Travel X / Y / Z
229 / 178 / 137 mm
Maximum clearance, table to spindle
229 mm
Hole through spindle
10 mm
Spindle nose thread
3/4-16 TPI
Motor
90 V DC with electronic speed control
Input supply
100–240 V AC, 50 or 60 Hz
Spindle speed
70–2800 rpm
About This Product
Its electronic speed control takes any input from 100 to 240 V AC at 50 or 60 Hz and converts it for the 90 V DC motor, so the machine runs on either supply. Speed is varied continuously from 70 to 2800 rpm, and the adjustable throat and 229 mm clearance under the spindle set the size of work it accepts. Educational Lab Equipments can supply and export the 8 Directional Vertical Milling to North Macedonia, Serbia, Democratic Republic of the Congo, Suriname, Gambia and Vanuatu.
Frequently Asked Questions
What supply does the 8 Directional Vertical Milling machine need?
Any input from 100 to 240 V AC, 50 or 60 Hz; the electronic speed control converts it for the 90 V DC motor.
What is the spindle speed range?
70 to 2800 rpm, continuously variable through the electronic speed control.
How large is the table?
70 x 330 mm, with 2 T-slots for holding work down.
