CNC Lathe Trainer Stepper Manufacturer,Supplier and Exporter in India
Product Code : EL-CTM-11737
Quick Answer: The CNC Lathe Trainer Stepper is a PLC-controlled CNC trainer lathe whose X and Z axes are driven by stepper motors, turning work up to 40 mm diameter and 250 mm long with a 2 HP AC servo spindle.
Last updated: October 2026
Key Features
Bed in flat or 45 degree slant form; 100 mm chuck, hydraulic or manual.
Maximum turning 40 mm diameter x 250 mm length; swing over bed 200 mm, 320 mm between centres.
Stepper motors with stepper drives on X (100 mm travel) and Z (300 mm travel), with 25 x 5 ball screws.
2 HP AC servo spindle, 100 to 4000 rpm with VFD.
Automatic turret with 4 or 8 stations for 12 x 12 mm tools.
Automatic lubrication and coolant, FMS compatibility and an optional C axis with brake.
Technical Specifications
| Specification | Value |
|---|---|
| Bed type | Flat / 45 degree slant |
| Chuck | 100 mm, hydraulic or manual |
| Maximum turning diameter / length | 40 / 250 mm |
| Centre height | 100 mm |
| Swing over cross slide / bed | 60 / 200 mm |
| Distance between centres | 320 mm |
| Control system | PLC based |
| Keyboard | Emulated or standard |
| Spindle | 2 HP AC servo, 100–4000 rpm with VFD |
| Axis drive | Stepper motors with stepper drives |
| Travel X / Z | 100 / 300 mm |
| Feed rate / rapid travel | 0 to 1,200 mm/min / 1,200 mm/min |
| Turret | Automatic, 4 / 8 stations |
| Tool cross section | 12 x 12 mm |
| Tailstock | 170 mm base stroke, hydraulic or manual |
| Positioning / repeatability / resolution | 0.010 mm / +/-0.015 mm / 0.010 mm |
| Dimensions | 1480 x 800 x 1200 mm |
| Power supply | 230 V, single phase |
About This Product
Programs are entered on an emulated or standard keyboard and run by a PLC-based control system, which moves the slides through stepper drives at feed rates up to 1,200 mm/min. The tailstock has a 170 mm base stroke, lubrication and coolant are both automatic, and FMS compatibility is provided for linking the lathe into a flexible manufacturing set-up.
Frequently Asked Questions
What drives the axes on the CNC Lathe Trainer Stepper?
Stepper motors with stepper drives move the X and Z axes through 25 x 5 ball screws, giving 100 mm and 300 mm of travel.
What power supply does it use?
230 V, single phase.
How many tools does the turret take?
The automatic turret is offered with 4 or 8 stations and takes tools of 12 x 12 mm cross section.
Related: CNC Trainer Machine, CNC Trainer Lathe Machine, CNC Lathe Controller, CNC Semi Production Lathe.
For a quotation on the CNC Lathe Trainer Stepper, contact Educational Lab Equipments.
