Upright Drilling Machine Manufacturer,Supplier and Exporter in India
Product Code : EL-MMTM-11951
Quick Answer: The Upright Drilling Machine drills holes up to 25 mm (1 in) in diameter, with 140 mm of spindle travel and a Morse number 3 taper in the spindle bore. At 50 Hz its spindle runs from 100 to 2,900 rpm, and a 3-phase cooling pump is part of the specification.
Last updated: October 2026
Key Features
Maximum drilling diameter 25 mm (1 in).
Spindle travel up to 140 mm; Morse number 3 spindle bore taper.
315 mm from the spindle centre to the face of the vertical column.
Working table 315 x 415 mm; base plate working area 475 x 400 mm.
Spindle speeds of 100 to 2,900 rpm at 50 Hz.
3-phase cooling pump; flow capacity 12 L/min.
Technical Specifications
Specification
Value
Max. drilling diameter
25 mm (1 in)
Spindle travel
140 mm (5 1/2 in)
Spindle taper
Morse number 3
Spindle centre to column
315 mm (12 3/8 in)
Spindle speeds at 50 Hz
100 to 2,900 rpm
Working table
315 x 415 mm (12 3/8 x 16 3/8 in)
Base plate working area
475 x 400 mm (18 11/16 x 15 3/4 in)
Motor power
0.75 or 0.55 kW
Flow capacity
12 L/min
Supply
380 V, 50 Hz
About This Product
In a training workshop, jobs are clamped either on the 315 x 415 mm table or on the larger base plate at the foot of the vertical column. The specification lists a 0.75 or 0.55 kW motor and a 380 V, 50 Hz supply.
Frequently Asked Questions
What is the drilling capacity of the Upright Drilling Machine?
It drills up to 25 mm (1 in) diameter, with 140 mm of spindle travel and a Morse number 3 spindle taper.
What power supply does it need?
The specification gives 380 V, 50 Hz, with a 0.75 or 0.55 kW motor and a 3-phase cooling pump.
