Parting Tool Holder Manufacturer,Supplier and Exporter in India
Product Code : EL-MMTM-11935
Quick Answer: The Parting Tool Holder grips and guides a bevelled parting blade so that clearance is equal on both sides of the cut. It is a one-piece holder that fits either the front or the rear tool post and is sold without the blade.
Last updated: October 2026
Key Features
Holds and guides a bevelled blade with equal clearance on both sides.
One-piece construction with 100% clamping power.
Mounts on the front or the rear tool post.
Three sizes, for blades of 1/2 x 3/32 in, 5/8 x 3/32 in and 3/4 x 1/8 in.
Supplied without the blade.
Technical Specifications
Specification
Value
For blade 1/2 x 3/32 in
Length 2-3/4 in, height 13/16 in, width 1/2 in, depth 1/2 in
For blade 5/8 x 3/32 in
Length 2-3/4 in, height 13/16 in, width 1/2 in, depth 9/16 in
For blade 3/4 x 1/8 in
Length 2-3/4 in, height 13/16 in, width 19/32 in, depth 11/16 in
Construction
One piece
Blade
Not included
About This Product
Clamped in the lathe tool post, the holder presents the blade to the work for parting off, with the bevelled blade sitting at the same clearance on each side. All three sizes share a length of 2-3/4 in and a height of 13/16 in, and differ in width and depth to suit the blade.
Frequently Asked Questions
Is the blade included with the Parting Tool Holder?
No. The holder comes without the blade, which is chosen to match one of the three sizes: 1/2 x 3/32 in, 5/8 x 3/32 in or 3/4 x 1/8 in.
Can it be used on the rear tool post?
Yes. The holder can be mounted on either the front or the rear tool post.
