Distance Sensor Manufacturer,Supplier and Exporter in India
Product Code : EL-TWL-11818
Quick Answer: The Distance Sensor is an infrared sensor that measures from about 10 cm to 80 cm (4 to 32 inches) and gives a single analog voltage output. It runs on 4.5 V to 5.5 V and draws about 30 mA on average.
Last updated: October 2026
Key Features
Measuring range approximately 10 cm to 80 cm (4 in to 32 in).
Analog voltage output, 1.9 V differential over the range.
Three connections: power, ground and output signal, left to right.
Operating voltage 4.5 V to 5.5 V, average current 30 mA.
Response time 38 +/- 10 ms; weight 3.5 g.
Technical Specifications
Specification
Value
Measuring range
10 cm to 80 cm (4 in to 32 in)
Output
Analog voltage
Output differential over range
1.9 V
Operating voltage
4.5 V to 5.5 V
Average current
30 mA
Response time
38 +/- 10 ms
Weight
3.5 g (0.12 oz)
About This Product
Fed into an analog-to-digital converter, the output gives distance readings; fed into a comparator, it can trigger at a set threshold. Most microcontrollers connect without difficulty, and three wires can be soldered directly where the connector pins are mounted.
Frequently Asked Questions
How is the sensor wired?
It has three connections, from left to right: power, ground and output signal. Wires can be soldered straight to the sensor at the connector pins.
Can it switch at a set distance?
Yes. Its analog output can drive a comparator for threshold detection, or an analog-to-digital converter for distance readings.
