Combination Surface Planer and Thicknesser Manufacturer,Supplier and Exporter in India
Product Code : EL-WWPT-11689
Quick Answer: The Combination Surface Planer and Thicknesser surfaces and thicknesses stock up to 408 mm wide on one machine, using a 70 mm cutter block with 3 knives at 5500 rpm. Thicknessing height runs from 3 to 225 mm with a 7 m/min feed.
Last updated: October 2026
Key Features
Planing width up to 408 mm.
70 mm diameter cutter block carrying 3 knives, running at 5500 rpm.
Thicknessing height from 3 mm to 225 mm, fed at 7 m/min by a 32 mm rubber out-feed roller.
Maximum chip removal of 3 mm when planing and 4.5 mm when thicknessing.
Fence tilts between 45 and 90 degrees.
120 mm dust outlet.
Technical Specifications
Specification
Value
Motor
4 kW / 3 HP
Max planing width
408 mm
Thickness height
3–225 mm
Max chip removal
3 mm planer, 4.5 mm thicknesser
Feed speed
7 m/min
Out-feed roller
Rubber, 32 mm diameter
Planer table
1660 x 410 mm
Thicknessing table
600 x 408 mm
Cutter block
70 mm diameter, 5500 rpm, 3 knives
Fence tilt
45–90 degrees
Dust outlet
120 mm
Machine dimensions
1660 x 870 x 1000 mm
About This Product
On the long 1660 x 410 mm planer table a face is flattened and an edge squared against the tilting fence. The board then passes through the thicknessing section on its 600 x 408 mm table, where the opposite face is brought parallel at the set height, so one machine covers both steps.
Frequently Asked Questions
What thickness range can it produce?
Thicknessing height is adjustable from 3 mm to 225 mm, with up to 4.5 mm removed at a time on the thicknesser and 3 mm on the planer.
What are the table sizes?
The planer table is 1660 x 410 mm and the thicknessing table is 600 x 408 mm.
How much floor space does it need?
The machine measures 1660 x 870 x 1000 mm overall.
