Electro Pneumatic Trainer Manufacturer,Supplier and Exporter in India
Product Code : EL-CTM-11747
Quick Answer: The Electro Pneumatic Trainer shows how pneumatic control systems and electro-pneumatic circuits are designed, built and applied, using foot-mounted 25 x 100 mm cylinders, 5/2 and 3/2 way solenoid valves and a powder-coated control panel.
Last updated: October 2026
Key Features
Single and double acting cylinders, 25 mm bore x 100 mm stroke, foot mounted.
Solenoid valves: 5/2 way and 3/2 way, 1/4 inch, 230 V AC or 24 V DC.
AND (dual pressure) valve, OR (shuttle) valve, flow control valve, non-return valve, 6-way block manifold and sintered silencer.
Air filter regulator / FRL unit 0–10 kg/cm2; pressure gauge 0–7 kg/cm2 with 100 mm dial.
Inductive 2-wire proximity sensors, 18 mm diameter, 5 mm sensing distance; 24 V DC relay module with 2 NO/NC contacts.
Unidirectional pneumatic motor, free speed 22,000 rpm at 0–90 psi.
Technical Specifications
| Specification | Value |
|---|---|
| Cylinders | 25 mm bore x 100 mm stroke, foot mounting |
| Solenoid valves | 5/2 and 3/2 way, 1/4 inch, 230 V AC / 24 V DC |
| FRL unit | 1/4 inch, 0–10 kg/cm2 |
| Pressure gauge | 0–7 kg/cm2, 1/2 inch connection, 100 mm dial |
| Proximity sensors | Inductive, 2 wire, 18 mm diameter, 5 mm sensing |
| Pneumatic motor | Unidirectional, 22,000 rpm free speed, 0–90 psi |
| Tubing | 6 mm OD, 4 mm ID; 10 m transparent, 10 m blue |
| Relay module | 24 V DC, 2 NO/NC contacts, panel mounting |
| Air compressor (optional) | 25 litre tank, 2 CFM, 2 HP 230 V AC motor, 5–6 kg/cm2 |
About This Product
Circuits are built on the profile plate with push-pull connectors and plastic tubing, then switched from an MS powder-coated electrical panel that carries switches, indicators, test points and the controller on its front fascia. Wiring uses 1 sq mm multistrand wire with insulated lugs and ferrules, run through a 1 x 1 inch PVC cable tray, and the relay board supports logic circuit operation, with training manuals and mimic charts to guide use.
Frequently Asked Questions
What valves come with the Electro Pneumatic Trainer?
5/2 way and 3/2 way solenoid valves, an AND (dual pressure) valve, an OR (shuttle) valve, a flow control valve and a non-return valve, with 1/4 inch connections.
Is an air compressor included?
An air compressor is optional: 25 litre tank, 2 CFM discharge, 2 HP 230 V AC motor and 5–6 kg/cm2 working pressure.
What sensors are provided?
Inductive 2-wire proximity sensors of 18 mm diameter with a 5 mm sensing distance.
Related: CNC Trainer Machine, Electro-Hydraulic Trainer, Hydraulic Trainer Kit.
For a quotation on the Electro Pneumatic Trainer, contact Educational Lab Equipments.
