Tilting and Swiveling Vice Manufacturer,Supplier and Exporter in India
Product Code : EL-MMTM-11944
Quick Answer: The Tilting and Swiveling Vice turns through 360 degrees horizontally and tilts through 90 degrees vertically, with positive locking to withstand heavy loads. Sizes of 3, 4, 6 and 8 in give jaw widths from 75 to 200 mm.
Last updated: October 2026
Key Features
Horizontal swivel of 360 degrees and vertical swivel of 90 degrees, with positive locking.
Hardened and ground jaws with one vertical and two horizontal V grooves.
Serrated working pattern on the top surface; anti-corrosive and anti-abrasion.
Longitudinal slot for quick alignment to machine tables.
Fine acme thread screw made of special steel.
Steel crank handle with a spring-loaded mechanism.
Technical Specifications
Specification
Value
Sizes
3, 4, 6, 8 in
Jaw width and opening
75, 100, 150, 200 mm
Jaw depth
35, 38, 50, 60 mm
Overall length
270, 340, 485, 635 mm
Overall height
135, 150, 195, 230 mm
Tenon slot
13, 16, 20, 20 mm
Approx. weight
8, 18, 42, 76 kg
About This Product
Aligned on the machine table through its longitudinal slot, the vice can be swung round and tilted so the work meets the tool at the angle required. On every size the jaw opening equals the jaw width, from 75 mm on the 3 in model to 200 mm on the 8 in model. Educational Lab Equipments can supply and export the Tilting and Swiveling Vice to Guinea, Fiji, Belarus, Eritrea, Vietnam and Saint Vincent and the Grenadines.
Frequently Asked Questions
How far does the Tilting and Swiveling Vice swivel and tilt?
It swivels 360 degrees in the horizontal plane and 90 degrees vertically, with positive locking in position.
What sizes are available?
3, 4, 6 and 8 in, with jaw widths and openings of 75, 100, 150 and 200 mm and approximate weights of 8, 18, 42 and 76 kg.
How are the jaws made?
The jaws are hardened and ground, with one vertical and two horizontal V grooves, and the top surface carries a serrated pattern.
