Dovetail Machine Manufacturer,Supplier and Exporter in India
Product Code : EL-WWPT-11703
Quick Answer: The Dovetail Machine is a half-blind dovetail jig whose cam-action clamps lock two boards so the tails and pins are cut together in one router pass. It comes with a 1/2-inch template and takes stock up to 1-1/4 inch thick.
Last updated: October 2026
Key Features
Cam-action clamping locks both boards in position.
Tails and pins cut in a single pass of the router.
For half-blind dovetails only.
1/2-inch template included; comb size 1/2 inch.
Stock up to 1-1/4 inch thick.
Technical Specifications
Specification
Value
Jig style
Half-blind only
Template
1/2 in, included
Comb size
1/2 in
Top width range
5-1/2 to 12 in
Front width range
5-13/16 to 10-7/8 in
Max stock thickness
1-1/4 in
Eccentric fixing allowance
5/16 in
Stop pin allowance
1 in
Dimensions
10-1/4 in H x 17 in W x 15-3/4 in L
About This Product
Both boards are clamped in the jig at the same time, and a router following the template cuts the tails in one and the pins in the other, so the two halves of the joint match. The top and front width ranges set how wide a board the jig will accept. Educational Lab Equipments can supply and export the Dovetail Machine to Indonesia, Mauritania, Lebanon, Ecuador and Turkey.
Frequently Asked Questions
Does the jig cut through dovetails?
No. It is made for half-blind dovetails only and is supplied with a 1/2-inch template.
What board sizes does it take?
Top width range is 5-1/2 to 12 inches, front width range 5-13/16 to 10-7/8 inches, and stock up to 1-1/4 inch thick.
Is a router needed?
Yes. The jig holds and guides the work, and the tails and pins are cut with one pass of a router.
